800XL SMT Reflow Soldering Machine LED Soldering Reflow Oven LED Strip Soldering Machine

• Customization: Available
• After-sales Service: Online
• Condition: New
• Model NO.: SD-800XL
• Certification: CCC, ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Transport Package: Wooden Case
• Specification: 5310 *1560*1560mm
• Trademark: SD
• Origin: China
• HS Code: 8515809090
• Production Capacity: 10000
• Package Size: 120.00cm * 100.00cm * 150.00cm
• Package Gross Weight: 800.000kg

Product Description

Product introducion

 

                    800XL full hot air circulation lead-free reflow soldering technical parameters


1 .Application:
       
    The 800XL SMT reflow soldering machine is a main equipment produced by Shengdian. It can be widely used for SMD soldering and fixing in SMT workshop for PCB board assembly, LED packaging, LED screen display, mobile phone motherboard, computer motherboard, safety control motherboard, electronic products etc. It can realize precise and stable temperature control in order to achieve fast and even soldering.

2. Range of application:
  
        Solder paste type: lead-free solder, ordinary solder, SMD glue;
Maximum substrate size which can be processed: 650 (mm) ;
It can be used for the following components: 0805, 0603, 0402, 0201, 01005 small component CSP, BGA, single-sided, dual-sided PCB board.
3. Main functions:

        The 800XL SMT reflow soldering machine can be used to solder the electronic parts and components such as BGA, various types of IC, QFN, resistor, capacitor, diode etc. onto LED screen display and LED substrate.

 4. Working principle:
   
          It can melt the printed solder paste on the PCB substrate and then fix the components on the substrate by precise positioning of reflow soldering.
5.Product features:
(1). It adopts LCD computer+automatic control system, so that it can realize precise temperature control within ±1ºC. If the computer crashed unexpectedly, it can still realize offline production without affecting the production.
(2). It adopts Windows XP and Win7 operating interface which is simple and has the function of one-key reset.
(3). The opening of the top stove cap adopts duplex cylinder hydraulic lifting rod to ensure safety and reliability. So the stove can be opened while there is no voltage.
(4). It is equipped with tension device for the chain to ensure smooth and stable PCB transport without jitter and shape change.
(5). The electronic component reflow soldering machine is equipped with synchronic track transport device to realize online connection with automatic placement machine and automatic board unloader.





 Product parameters: 

Engine body
Dimension L*W*H (MM)	5310 *1560*1560mm
Weight	2000KG
Temperature zones	16 hot wind zones (8 upper hot wind zones and 8 lower hot wind zones), 16 temperature control zones, 3 specific cooling zones
Temperature control
Temperature control mode	All the temperature zones are controlled by temperature module PID+pulse+SSR control
Precision of temperature control	± 1 ºC
Range of temperature control	Room temperature~350 ºC
Heating up time (cooling machine start)	About 15 minutes
Temperature stabilizing time	About 2 minutes
Conveyor structure
Width of conveyor belt	650mm
Transport mode	Chain/belt transport
Transport direction	L→R, R→L (optional)
Height of transport chain	90 0 mm ±20
Transport speed	0~ 22 00 mm/min
Track	Aluminum alloy track whose surface is hard anodized so that it has high intensity and small thermal deformation
Expansion and contraction quantity of chains	Less than 2.5 mm
Chain lubrication	Automatic lubricating device
Tension device of chains	Automatic tension of chain
Cooling system
Two cooling zones	AC 380V straight axle motor turbocharging
Fumes disposal	Pre-heating zone and constant temperature zone+pipes before and after the boiler stove pipe to discharge forcibly
Cooling mode	Elongated turbocharging cooling zone: 2 cooling zone+1 independent cooling zone
	Perfectly meet the cooling rate of lead-free soldering which is 4-8 ºC/S
Control system
Power supply	3 phase 5 wire 380V
Total power	55KW
Start up power/no-load power	18 KW /0.5KW
No-load constant temperature power	About 10KW
UPS	UPS 1000VA
Conveyor motor	Motor 220 VAC 3-phase 90 W
Wind turbine motor	Taiwan SAYU high temperature motor 3 phase AC 220/380V 120W 2800 r/min
Frequency converter	The hot wind frequency is controlled by 2 frequency converter with different power which can allow reasonable adjustment on converter frequency to change the wind speed according to the products.
Heater	Superior heating coil groups from Taiwan with fast heat exchanging speed and high efficiency of heat utilization
Alarm	Alarm when over temperature, and then automatically cut off the heating power
Control engine	Computer+solid state disk
Computer operating system	Specific control system for reflow soldering
Control system	Can set, reset and store parameters and analytic curve of temperature and speed

Product Description

Maintenance and repair

(1) High temperature

The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.

(2) Voltage problem

After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

(3) Professional maintenance

Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.   

FAQ:

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

 

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !