PCB Laser Marking Machine 20W 30W 50W Industry Laser Equipment

• Customization: Available
• Condition: New
• Certification: CCC, ISO, CE
• Model NO.: PCB Laser Marking Machine
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Transport Package: Wooden Case
• Specification: 1020*620*1420mm
• Trademark: SHENGDIAN
• Origin: China
• Production Capacity: 10000
• Package Size: 140.00cm * 90.00cm * 180.00cm
• Package Gross Weight: 100.000kg

Product Description

                                              HSGQ-20W/30W/50W fiber laser




1.Product configuration:
 

Type of equipment	HSGQ-20W/30W/50W	Place of Origin
Laser	20W fiber laser/30W fiber laser	Chuangxin
Scanning Lens	110mm x 110MM/140mm x 140MM/175MM/X175MM optional	Made in China
Bada Kim, vibro-scope	$10 mm Digital Vibroscope	Wuhan
Mark Card Software	EZCAD	Beijing Golden Orange
Power Supply	Switching power supply	Ming Wei, Taiwan
Push Button Switch	Diameter 22mm/10A with light self-locking	Made in China
Red Light	650nm/5mw	Xi'an Sapling

2.Introduction to the device:

Fiber laser marking machine is the use of laser beams in a variety of different surface of the permanent mark. The effect of marking is to reveal deep matter by evaporation of the surface material, or to carve marks by physical changes in the surface material caused by light energy, or to burn off parts of the material by light energy. Display the etch pattern, text, bar code, etc. . . Mainly consists of three parts: laser, vibrating lens and marking card, using fiber laser to produce laser marking machine, the beam quality is good, its output center is 1064 nm, the whole machine life is about 100,000 hours, compared with other types of laser marking machine life is longer, electro-optical conversion efficiency is more than 28% , compared with other types of laser marking machine 2%-10% conversion efficiency advantage is great, in energy-saving and Environmental Protection Performance.


3.Features:
(1) processing of a variety of metallic and non-metallic materials. In particular, high hardness, high melting point, brittle materials for marking,Than the other way around.
(2 )non-contact processing, no damage to the product, no tool wear, good marking quality.
(3 )the laser beam is thin, the material consumption is small, and the heat-affected zone is small.
(4) high processing efficiency, computer control, easy to achieve automation.

4.Key Performance Indicators

Technical parameter
Name	Fiber laser marking machine
Performance Index	HSGQ- -20W
Galvanometer control	The number XY2 -- 100
Basic function	Bar Code, two-dimensional code, Import File (PLT) single-line, line font, fill, Dot Matrix
Koto quality	M2<1.2
Maximum linear marking speed	≤3500mm/s
Laser wavelength	1064nm
Marking Range	Maximum marking range 110mm x 110MM/140mm x 140mm/175mm x 175mm Optional
Laser repetition frequency	30-60 khz adjustable
Adjustable range of laser power	0-100% continuous adjustable
Minimum character height	0.5mm
Repetition ACCURACY	0.005mm
Minimum linewidth	0.01mm
Cooling System	Air/water cooling
Operating System	Windows XP/Windows 7/Windows 8/Windows 10 optional
Font support	TrueType font, AUTOCAD single line font, custom font
One-dimensional bar code	Code39/code128itf Codabar/EAN/UC Etc.
2D Barcode	QR/PDF417/DATAMatrix (Ecc200) etc.
Support for text and graphics formats	PLT/DXF/DWG/SWG/STL/BMP/JPG/JPE/PNG/TIF
Cooling mode	Air Cooling
Optional accessories	Rotary fixture/2D table
Power requirement	AC220V/50HZ
Overall Power	≤1000W

 

Product Description

 

Maintenance and repair

(1) High temperature

The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.

(2) Voltage problem

After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

(3) Professional maintenance

Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.   

FAQ:

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.