Shenzhen Factory Wholesale Aoi Online Testing Inspection Machine

• After-sales Service: Online
• Condition: New
• Certification: CCC, ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Model NO.: Aoi online
• Transport Package: Wooden Case
• Specification: 1000*960*1600mm
• Trademark: SD
• Origin: China
• Production Capacity: 10000

Product Description

Product introducion

                                         Online Automated AOI Machine Technical Parameters



BGA detection function:

It is used to detect whether the BGA solder ball is less tin, tin, ball, and tin before the patch. In addition, it can also be used for PCB solder paste printing in the BGA area, such as less tin, missed printingn
Z series software can effectively detect the defects of surface mount, red glue process and wave soldering process to prevent leakage of defective products.

Feature:
1.HD image, easy for 01005 chip.
2.Full color image statistics analysis
3.Optical character recognition(OCR)
4.IC bridge analysis
5.Color analysis
6.Graphics similarity
7.Black white ratio analysis
8.Intensity analysis
9.Non linear color analysis
10.CAD data input and output
11.MPF technology, fast programming
12.Camera barcode identification(1D&2D)
13.Spare component library
14.Auto double side test
15.Auto skip test
16.SPC
17.Off line inspection system
18.NG Rate 99%, Repeat accuracy 3 pcs, False Negative 10PPM, False Positive 5000PPM
                                     

Inspection System & Optical System:

Inspection Object	Skew / Tombstone / Wrong part / Missing / Overturning / Damaged / Cold joint / insufficient solder / Excess solder
Inspection Component	01005 chip , IC pitch 0.3mm, wave soldering point
Inspection Method	Color image comparison, OCR, IC Short Analysis, Graphics Similarities Analysis, Color Analysis, Gray Analysis
Camera	Color CCD (2M) , Resolution 15um, FOV 24*18mm, Speed :2000 mm^2/s
Light Source	RGB cascade multi-angle LED combination lighting, high brightness, 2M pixels tele-centric lens, DOV:8mm

Software & Computer:

Inspection capability	120 points/sec ; programming time : 1-1.5 hr/1000 components, NG inspection rate >99% False reject rate : 005 - 3.0% (repeatability <3pcs) , False accept rate <0.01%
Mark Recognition	2 points, support multi-board multi-mark points, support bad mark ; Process speed 0.5sec/pcs
Computer	Dual core 2.7G, DDR II 2.0G, 500G hard disk, 22" wide screen LCD

Mechanical System:

PCB Thickness	0.3 - 5.0 (PCB curvature?5mm)
PCB Height	Top: 30mm, Bottom 35mm (can be customized)
Driving Method	AC Servo Motor + ball screw rod + linear guide rail
Motion Speed	Max 700mm/s
PCB Size330×400mm	, Auto-width adjustment
Conveyor Height	900± 20mm
Power	220V/50Hz, 650W,UPS 1000 VA uninterruptible power supply
Compressed Air	Max 0.3MPa
Dimension	1000mm×960mm×1600mm (alarm lamp height not included) ; alarm lampheight: 550mm
Weight	670kg

    

Product Description

 

 

Maintenance and repair

(1) High temperature

The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.

(2) Voltage problem

After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

(3) Professional maintenance

Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.   

FAQ:

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

A. Gold supplier on Alibaba !

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !