Factory Produced High Quality Fai Intelligent First Article Inspection System of SMT Equipment/Tester for The First PCB Board

• After-sales Service: Online
• Function: Inspection
• Display: Computer Screen
• Usage: Electric Component Tester
• Type: First Article Inspection Tester
• Environment: Room Temperature
• Model NO.: SD-FAI6000V
• Warranty: With Warranty
• Power Source: AC 85V-265V
• Weight: 〉10Kg
• Installation: Desktop
• Customized: Non-Customized
• Transport Package: Wooden Case
• Specification: 1200*780*750mm
• Trademark: SD
• Origin: China
• Production Capacity: 10000

Product Description

Product introducion

             SD-FAI6000V Intelligent First Article Inspection Tester 

Functions:  
1. Dual Map Function
The system software provides two pictures. The big picture shows all the information of the system, and the small picture shows partial enlarged information. During the detection, employees can clearly see whether the real silk screen is consistent, prevent the eyes from seeing wrong, and improve the detection efficiency.


2. Automatically generate the detection program
The system software can automatically identify customer BOM, coordinate file and PDF location map, and define different analysis rules for different customer BOM forms, so as to be compatible with various BOM forms. The detection program can be generated in about three minutes. During detection, the optimal path will be automatically screened, marked with dotted lines in the circuit diagram, and then improved with voice broadcast, greatly improving the detection efficiency.

3. Component screen printing, direction, polarity automatic recognitionFor IC chips, diodes, triodes and resistors containing characters. Through the optical system technology for automatic comparison, automatic determination of screen printing, direction, polarity. In addition, the resistance above 0402 can be detected by OCR with one key, and there is no need to make component template.

4. Automatically judge the detection result
The system software receives the high-definition pictures from the scanner and the detection data of the digital bridge, and automatically makes the judgment PASS or FALL.

5. Automatic report generation
After the test is completed, the test report will be generated automatically, and the document can be exported in PDF format, which can be archived, printed and sent by email for easy circulation and use by customers in the future process audit factory.

6. DTC Function
LCR adds the DCT gear, which can intelligently assist to complete the LED positive and negative power lighting detection, diode positive and negative detection and other functions.

7. Component query retrieval
The software supports a variety of retrieval methods, such as showing or finding undetected components, NG components, or a certain material number.

8. ERP,MES connection function
Reports can be connected with customers' ERP and MES systems, and actively upload or manual capture reports, which is convenient for production process and quality control.

Product Feature

1. Reduce manpower cost             2. Improve detection speed  

3. Automatic measurement judgment   4. Improve the quality of products
5. Simple process specification         6. Implement process traceability

 

Technical parameters:

Model	SD-FAI6000V
Dimension	1200*780*750mm
Weight	200KG
Environmental Conditions	Temperature 10~35ºC, Humidity 20%~80%
Type of Electric Bridge	CED-9587V LCR METER(Zhixin)
Power Supply	AC 220V(±10%),50~60Hz
LCR Test Frequency	20Hz ~ 300KHz  Basic accuracy: 0.05%
R/C Minimum Measurement	R 0.1Ω,C 0.1pf
Measuring Display Range	C 0.00001PF~9.9999F R 0.01MΩ~99.9999MΩ L 0.00001UH~9999.9H
Drawer in and out	One-button electric automatic control
Test Channel	RS-232
Programming Mode	1. Quickly import BOM and XY coordinates, and match them with PCB scanning graphics, or import PDF drawings to match. When the PCB board does not have silk screen printing, use the dual picture function, the left side displays the scanned pictures, and the right side displays the PDF bit number diagram. When measuring components, the drawing on both sides shall display the bit number at the same time.
	2. Automatically extract component specification information from material description. Component position display material component specifications (0603, 8005, etc.), in addition to the display of material specifications(100PF, 1KΩ, etc.)
	3. Support double-sided coordinate import, select one side for detection. Automatic identification and labeling empty paste position.
	4. Optical character detection class pull-frame interception. With a screen resistance one key automatic recognition.
	5. Bidirectional comparison between BOM and coordinates, displaying multiple attached components or missing attached components
Test Method	1. Resistance (below 0402), capacitance, inductance (except high frequency inductance) class use during clamp test, LCR automatically changes gears according to component type without manual switching. Automatically saves test records
	2. Resistance: 0603 above the screen printing of one-key extraction
	3. IC, transistor and other use automatic optical character check (appearance of the screen image than). Diodes can distinguish polarity
	4. LED: Light up the identification direction
	5. Sort and spot check
Software Function	1. LCR switches frequency automatically when testing components
	2. Support PDF bit-number map, 2. Scan picture or HD PCBA picture
	3. BOM and component coordinates only support Excel documents and text documents
	4. There is an ECN engineering update table, and every time the test is carried out, there will be text reminding of the ECN update
	5. Component specifications are displayed under the component bit number according to the description in BOM square display, e.g. C1 :100nF,0603,R1:100KΩ, 080
	6. With dual map function, it is convenient to use when the PCB has no screen printing. The left side is the real object figure, on the right is the PDF bit-number diagram.
	7. With BOM and coordinate comparison function, to prevent multiple or fewer pieces, with red font display.
	8. The quantity of tested components and untested components is displayed to prevent leakage test. The test report shows the test time, the name of the tester, the total number and type of components, component values and pictures, etc.
	9. BOM quantity is wrong, location is repeated, XY coordinate definition is missing, multiple definition. Circuit board: more paste, missing parts, wrong parts, reverse, cartwheel, offset, rotation, etc
	10. Detection methods: (1)optimal path, (2) station table, (3) BOM, (4) material code and category, (5) the principle of proximity
Scanner	Custom HD CCD (MICROTEK 9980XL Plus)
Scanning light source	White-light LED
Scanned area	310*410mm, upper height 28mm, lower height 50mm
PCB board range	310*410mm, upper height 28mm, lower height 50mm
Detection coverage type	BOM quantity is wrong, location is repeated, XY coordinate definition is missing, multiple definition. Circuit board: more paste, missing parts, wrong parts, reverse, cartwheel, offset, rotation, etc
SPC process control	Test data can be recorded throughout the whole process, and the report can be output in PDF format to restore the test in the later stage
Optical resolution	600~4800mm DPI 0.01mm/pixel
Primary Attachments	Brand
Computer host	CPU Intel I5 9500 (Yanwei)
Monitor	Philips (24 inches), which can be adjusted up and down according to employee height, can be adjusted back and forth according to employee vision
RAM	8G
Hard Disk	120G solid state M2+1TB mechanical hard disk
LCR	CED-9587V LCR METER  (300K)
Mouse&Keyboard	Logitech (Wireless)
Keypad	SANWA (Japan)
Power Switch	Ming Wei (Taiwan)
Inductor	Omron (Japan)
Relay	Omron (Japan)
Bearing, synchronous wheel, linear slide rail	Mismi (Japan)
Software	SDDZ
PCB board test turntable	Made in China
[Note: The above parameters are for reference only. Technical parameters may be changed due to product upgrade or customer customization, etc. Shengdian Electronics has the right to make the final analysis.

 

Product Description

 










Company profile 







Maintenance and repair

(1) High temperature

The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.

(2) Voltage problem

After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

(3) Professional maintenance

Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.   

FAQ:

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

A. Gold supplier on Alibaba !

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !