Product introducion
SD- 630 BGA Rework Station
Features:
1. The upper heating head and the mounting head of the machine are integrated, featuring automatic welding/automatic removal and automatic placement.
2, using touch screen man-machine interface, PLC control, display six temperature curves at any time, the temperature is accurately controlled at +1 degree, 8-stage temperature control, excellent temperature control system can better guarantee the welding effect.
3. The upper and lower three temperature zones are independently heated. In the first temperature zone, the second temperature zone can simultaneously control multiple sets of multi-stage temperature, and the third temperature zone enables the PCB board to preheat in a large area, so that the welding achieves the best effect.
4. The unique PCB support design of the second temperature zone can be raised and lowered to prevent the defects caused by the collapse of the PCB board during the welding process.
5. Select high-precision K-type thermocouple closed-loop control, and 3 external temperature measurement interfaces to achieve precise temperature detection.
6, can store 1-100 sets of temperature curve settings, curve analysis, change settings at any time on the touch screen.
7. The PCB positioning adopts the V-shaped groove, and the flexible and convenient movable universal clamp protects the PCB.
8. Use high-power cross-flow fan to quickly cool the PCB board to prevent deformation of the PCB board and ensure the welding effect.
9, BGA desoldering has an alarm function, in the case of temperature out of control, the circuit can automatically power off, with dual over-temperature protection.
10. The touch screen controls the upper heating system and the optical alignment device, which is convenient and flexible to operate, and ensures the alignment accuracy is controlled at 0.01-0.02mm.
11. This machine adopts high-precision optical video alignment system with zooming and zooming function and auto focus, with 15 inch color LCD monitor.
12, high degree of automation, can avoid human error, can achieve unique effects on the repair of lead-free process and pop packaging.
13. This machine has an over-temperature alarm function, which will automatically cut off the heating after over-temperature.
14. High-sensitivity photoelectric switch can prevent the heating head from crushing the PCB main board during the operation of the device.
Product Parameters
Technical parameters:
| Total Power |
5200W |
| Upper hot air heater |
1200W |
| Lower hot air heater |
1200W |
| Bottom IR preheating temperature zone |
2700W |
| Other power |
100W |
| Power Supply |
AC 220V±10% 50/60Hz |
| Electrical selection |
Panasonic motion control system + large screen true color touch screen + high-precision intelligent temperature measurement control module |
| Temperature control |
High-precision K-type thermocouple (K Sensor) closed loop control (Closed Loop), independent temperature measurement up an down, temperature difference ±1 degree |
| Targeting |
V-shaped card slot, PCB bracket can be adjusted in any direction of X and Y, laser positioning lamp can be quickly positioned |
| PCB Size |
Max 560×420mm Min 10×10mm |
| Overall Size |
L680×W700×H920mm |
| Machine Weight |
Net weight 85KG |
| Exterior Color |
Black |
Product Description
Maintenance and repair:
(1) High temperature
The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.
(2) Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.
(3) Professional maintenance
Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.
FAQ:
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Made-in-China !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service !
Audited Supplier 
){kind=link}
){kind=link}